Midgetec

I have to admit I was not really ready to tackle the hood bulge.  I started shaping the sheetmetal about 6 weeks ago, and it came out pretty decent, but I was not looking forward to splicing it into the hood. Most of my sheetmetal work gets hidden away… more »

So I got part two of the sound attenuation done yesterday.  Pretty straight forward.  Measure, cut, spray glue on both sides, and press in place.  On the more complicated pieces I used some posterboard for making templates.  It looks good and should be… more »

Back at it this past couple of weekends after a pretty long break.   The European Auto Festival is in mid-October at the BMW museum in Greer, SC near Greenville.   Turns out they're celebrating 50 years of the MG Midget.   That's about all the motivatio… more »